II. INTRODUCTION FEATURE
The symptoms of poor power quality include intermittent lock-ups and resets,
corrupted data, premature equipment failure, over-heating of components for no
apparent cause, etc. The ultimate cost is in downtime, decreased productivity and
frustrated personnel.
Use power analyzer to power quality trouble shooting can help you keep your
power system up and running, troubleshoot problems quickly, improve power
efficient, manage energy costs, zero in on harmonics, optimize power system
performance, improve power quality and analyze system data to design optimal
upgrades.
10 display Easy-to-view LCD screen, and is capable of showing many power
quality parameters at the same time.
4 current probe including for measuring a neutral line current.
Measures single-phase 2-wire, single-phase 3-wire, three-phase 3-wire and
three-phase 4-wire systems.
All True-RMS sensing , V, A, KW, KVAR, KVA, PF, θ, Hz, KWh, KVARh and
KVAh measurements.
Phase sequence indicator function.
Backlight display function.
Manual Data Memory and Read (99 sets).
Data logging (504K byte memory, 12,000 sets per block, total 20,000 sets).
RS-232 optical interface with three phase voltage / current waveform display and
harmonic analysis.
Easy-to-use key operation.
Light weight and portable design.
III. SPECIFICATIONS
3-1 Environment Conditions:
Altitude up to 2000 meters
Indoor use only
Relatively humidity 80% max.
Operation ambient 0～40℃
Shop for Data Logging products online at: www.DataLoggerStore.ca 1.877.766.5412
To Next Page
Loading...
Need help?
General
