- 18 -
Data Recall
Certain weather data or setting values can only be read out, processed, and
displayed by means of a PC. Also, the settings of the storing intervals from 5
minutes to 240 minutes for the storage of data sets can only be changed via a
PC.
Connections and Software
The wiring between Weather Station and PC takes place by means of an
included USB cable.
The EasyWeather software can be download from
http://download.ecowitt.net/down/softwave?n=Easyweather
It must be installed on the PC.
This software allows the display of all present weather data with graphic symbols.
It also allows the display, storage, and printing of history data sets, this is useful
when the internal memory on the display unit has exceeded the maximum 4080
data sets.
PC software installation
The installation software is very simple: double click the setup.exe file and follow
the steps popped up.
Make sure you are running the program under the administrator accounts of your
windows PC platform. Otherwise the graphic function might not work when the
graph display mode is needed to display all history data.
When you run the program for the first time, the current weather readings will be
displayed and the sub line of the window will show related information regarding
the reading of all history data into the PC. Please note that when there is large
amount of data being uploaded, it will take a few minutes before the system can
respond to your setup settings. Otherwise it will display a “read weather data fail”
error message, this is because the USB port is reading the data from the
memory and the system is not able to respond any further job tasks.
To Next Page
Loading...
Need help?
General
