TESA WS1081 - System Option; Click the System Button to Enter the Setting Menu

- 24 -
base station (the setting changes will take one minute to sync to the base
station).
When the base station is connected to the PC, it shows “USB Connected” at the
bottom of screen. If there isn’t a base station connected, it shows “USB
Unconnected”.
Tool Bar: The tool bar at the top of the screen has 4 options; System, Record,
Upload and Help.
4.1 System option
4.1.1 Click the System button to enter the Setting menu
This section is used to set up the PC software display, and base station units.
Once you have made your choices, press Save to make the setting effective.