4 Using the product
19
Parameter Description
Dewpoint The parameter "Dewpoint" (combustion air
dewpoint) influences the calculation of qA (flue gas
loss) and flue gas dew point. The factory setting for
the dewpoint is 1.5°C. To achieve a higher
accuracy, the values can be adjusted to the actual
ambient conditions.
4. Finalise the entry: [Finished].
Other location options:
> [Options] → Edit location: Make changes to an existing
location.
> [Options] → Copy location: Make a copy of an existing
location in the same folder.
> [Options] → Delete location: Delete an existing location.
Create a new folder:
1.[Options] → New Folder → [OK].
2.Enter values or make settings.
3.Finalise the entry: [Finished].
Other folder options:
• Edit Folder: Make changes to an existing folder.
• Copy Folder: Make a copy of an existing folder.
• Delete Folder: Delete an existing folder, including the locations
created therein.
• Delete All Folders: Delete all existing folders, including the
locations created therein.
4 Using the product
4.1. Performing settings
4.1.1. Assigning the right hand function key
The right function key can have a function from the Options menu
assigned to it. The menu Options is accessed via the left function
key and is available in many different menus. This assignment is
only valid for the currently opened menu / the opened function.
To Next Page
