4 Using the product
26
> Activate the location to which the readings are to be assigned.
> Make sure that the gas outlets are free, so that the gas can
escape without obstruction. Otherwise the measurement results
may be corrupted.
4.2.2. Applications
You can choose from fixed saved and a user defined application
(application defined on the basis of the measuring object).
The memory contains suitable device settings for the meas. box
and typical fuels and calculations for these applications. These
quickly provides you with optimized device configurations for the
respective measuring task and the device will automatically inform
you about important application specific peculiarities (information in
the display).
Calling up the function:
> [
] → Applications → [OK].
Press the function key Options to open configuration
menus.
1.Selecting an application: [ ], [ ] → [OK].
2. Selecting fuel: [
], [ ] → [OK].
3. Choose measurement type: [
], [ ] → [OK].
To Next Page
