TESTO 350 - Date; Time; Programs

4 Using the product
22
Change parameter / unit in a line:
1. Select the line: [▲], [▼] → [Change]
2.Select the parameter: [▲], [▼] → [OK]
3. Select the unit: [▲], [▼] → [OK]
4. Save changes: [OK]
Options:
> [Options] → Number of lines: Change the number of
measuring values per display page.
> [Options] → Blank line: Insert the empty line before the
selected line.
> [Options] → Delete line: Delete the selected line.
> [Options] → Factory setting: Reset the readings display to
factory setting.
4.1.2.2. Date / time
This function is available in both the meas. box and the Control
Unit. Changes are accepted for the Control unit and for the meas.
box.
Date, time mode and time can be set.
Calling up the function:
> [
] → Instrument Settings → [OK] → Date/Time → [OK]
Set date/time
1. Select parameter: [◄], [▲], [▼] → [Edit].
2. Set parameter: [▲], [▼] and partly [◄], [►]→ [OK].
3. Save changes: [Save].
4.1.3. Programs
Five flue gas measuring programs can be set, saved and executed.
The Trigger function (trigger signal as start/stop criterion) is only
available for devices with the trigger input option.
Instrument settings cannot be changed if a program is
active or running.