4 Using the product
20
✓ A menu / function is opened in which the Options menu is
displayed on the left function key.
1.Press [Options].
2. Select option: [
], [ ].
Depending on the menu / function from which the Options menu
was opened, various functions are available.
3. Assign the selected function to the right function key: Press the
[Config. Key].
4.1.2. Instrument settings
4.1.2.1. Measurement view
(only available via Meas. Box tab)
The parameters / units and the display representation (number of
readings displayed per display page) can be set.
The settings are only valid for the currently chosen combination of
application and measurement type, which is indicated by the
symbol (application) and the text (measurement type) in the info
field.
Total overview of selectable parameters and units (available
selection depends on the chosen application / measurement type):
Display Measurement parameter
FT
Flue gas temperature
AT
Combustion air temperature
HCT
Heat carrier temperature
Δp
Differential pressure
Δp1
Differential pressure 1 (flue gas + m/s)
Δp2
Differential pressure 2 (flue gas + ΔP)
Draught
Flue draught
Pabs
Absolute pressure
Pump
Pumping capacity
O2
Oxygen
O2ref
Oxygen reference
CO2
Carbon dioxide
CO2max
maximal carbon dioxide content
Effn
Efficiency
To Next Page
