Adding the Advanced Remote Control
www.ti.com
5. Ensure that the Bluetooth is set to ON.
NOTE: The PC will search for Bluetooth devices.
6. Press any button on the remote to start advertising.
NOTE: The HID AdvRemote will appear in the device list.
7. Press the icon.
8. Press the Pair to pair the remote to the PC.
NOTE: A window opens with a passcode.
9. Input the passcode using the numeric buttons on the remote.
10. Press OK .
14
Connecting the Advanced Remote Control to Windows 8 SWRU343A–April 2013–Revised June 2015
Submit Documentation Feedback
Copyright © 2013–2015, Texas Instruments Incorporated
To Next Page
Loading...
