n
Note: Palettes created or modified with the PAL command
are not saved. PAL /S displays the currently selected LCD
pallette.
Other Ways to Select a Predefined Palette
After you define a palette using the RPAL utility, you have
two additional ways to select the defined palette:
❑ Select the palette from the keyboard
❑ Include the command in your
AUTOEXEC.BAT file
Selecting the Palette From the Keyboard — To change the
current palette, press FN-ALT-ESC. Each time you press
FN-ALT-ESC, the display changes to the next palette (P0
through P5). Stop pressing FN-ALT-ESC when the palette
you prefer is displayed.
Including the Palette in the
AUTOEXEC.BAT file — If you
want the computer to load a particular palette at start up,
include the
PAL command in your AUTOEXEC.BAT file. For
example, to start up with user palette 1 loaded, include the
command PAL P4 in your
AUTOEXEC.BAT file.
n
Note: You also can press FN-ALT-ESC to toggle through
the six available palettes.
Viewing the Current Palette
To view the palette currently in use, type PAL /S at the
MS-DOS prompt and press ENTER.
The current palette is displayed along with the following
statement:
PAL Utility
6-4 Palette Utilities
To Next Page
Loading...
