Texas Instruments TravelMate 4000M - Single-Character Quick Commands

❑ F1 — Help screens
❑ F2 — (Laptop) File Manager
❑ F3 — Save Config(uration) described under the
SETCMOS utility elsewhere in this manual
❑ F4 — Reset Config(uration), which is part of the
SETCMOS utility
Single-Character Quick Commands
At the bottom of the LM menu Quick Commands box are
two commands:
❑ Pressing D (for
DOS command) causes LM to display a
prompt at the bottom of the screen where you can enter
MS-DOS commands of up to 67 characters. Pressing
ENTER starts the command. When the command is
executed, pressing any key returns you to the LM main
menu.
❑ Pressing P (for path) causes LM to display a prompt at
the bottom of the screen where you can change drives
or directories. For example, you can change from the
C:\ (root directory) to the C:\UTILS directory by
pressing P, typing C:\UTILS, and pressing ENTER.
You can change from the
C:\ drive to the A:\ drive by
pressing P and A, and then pressing ENTER.
LM Main Menu
4-4 Laptop Manager