Saving Your CMOS Data
Once you have used the computer’s Setup Program to
configure your new computer for your operating
environment and options, you should save the data stored
in the
CMOS RAM to your own custom file.
To save the current
CMOS RAM data, at the MS-DOS C:\>
prompt type
SETCMOS /S MYFILE.CMS
and press ENTER.
You can type any filename you want instead of the
MYFILE.CMS filename shown in the example. If you ever
need to restore the computer to your configuration settings,
type your filename to the
SETCMOS /R command described
previously.
SETCMOS Utility
Other Utilities 9-9
To Next Page
Loading...
