Texecom Premier Elite Series

Quick Start Guide Premier Elite Series
16 INS222-10

UDL/Digi Options
Reporting Options
Press / to edit,  -  to select option, / to accept (only available for Contact ID, SIA Level II,
EasyCom Pager, SMS Messaging and Speech Module)

P = Priority Alarms

M = Maintenance

A = Normal Alarms

T = Tamper Alarms

C = Open/Close

C = Test Calls

O = Omits & Reinstates

R = Restores
Config 1:
Press / to edit,  -  to select option, / to accept

A = Use Area Acc

A = Activate AV

S = Use SIA I

F = Use GSM First

R = Enable RadioPad

I = Connect Via IP

G = Enable GSM

T = Send SIA Text

Config 2:
Press / to edit,  -  to select option, / to accept

1 = Use Com Port 1

3 = Use Com Port 3

2 = Use Com Port 2

4 = Add Push Message

Digi Options
Press / to edit,  to select an option, / to change the option, / to accept

E = Digi is Enabled

B = Blind Dialling

P = Pulse Dialling

W = Call Waiting On

3 = Pulse after 3

A = Dial All Numbers
*
Enable Texecom
Connect App
THIS MENU ONLY APPEARS ONCE THE TEXECOM CONNECT PROTOCOL HAS BEEN SELECTED.
SUBSEQUENT MENUS ARE INCREMENTED ACCORDINGLY SO 5 BECOMES 6 etc
Used to enable the Connect App. Communicates with our secure servers and issues an app code to be entered into the
Users Smart device.

UDL Options
Press / to edit Call Back number 1, enter the number, / to accept
 -  = Numbers 0 to 9
/
Insert a ‘#’
/ then  = Clear Screen
s/P
, (3 Second pause)
O Insert a ‘*’
A/A
W (10 Second pause)
Call Back Number 2
Press / to edit Call Back number 2, enter the number,  to accept
Call Back Number 3
Press / to edit Call Back number 3, enter the number,  to accept

UDL Password
Press / to edit,  -  to enter number,  to accept
UDL options
Press / to edit,  to select an option, / to change option,  to accept

A = Attended Download

L = Restrict Download when Armed

M = Manual Call-back

A = Download when Part Armed

D = 2-Call Answer Phone Defeat

K = Online RKP = Off)
Rings Required
Press / to edit,  -  to enter number of rings, / to accept
UDL Dial Attempt
Press / to edit,  -  to enter number of dialling attempts, / to accept

Area Accounts
Use  to select an area, / to edit,  -  to enter account number, / to accept

Setup Modules
Press R/R to reset communicator
Setup Radio-Pad?
Press / to set-up Radio-Pad, N/N to exit
Pad ARC 1 Pri No
Press / to edit,  -  to enter telephone number, / to accept
Pad ARC 1 Sec No
Press / to edit,  -  to enter telephone number, / to accept
Pad ARC 1 Prefix
Press / to edit,  -  to enter pad prefix, / to accept
Pad ARC 2 Pri No
Press / to edit,  -  to enter telephone number, / to accept
Pad ARC 2 Sec No
Press / to edit,  -  to enter telephone number, / to accept
Pad ARC 2 Prefix
Press / to edit,  -  to enter pad prefix, / to accept
Pad ARC 3 Pri No
Press / to edit,  -  to enter telephone number, / to accept
Pad ARC 3 Sec No
Press / to edit,  -  to enter telephone number, / to accept
Pad ARC 3 Prefix
Press / to edit,  -  to enter pad prefix, / to accept
Setup AV Module?
Press / to set-up AV Module, N/N to exit
AV No.1
Press / to edit,  -  to enter telephone number, / to accept
AV No.2
Press / to edit,  -  to enter telephone number, / to accept
AV No.3
Press / to edit,  -  to enter telephone number, / to accept
AV Dial Attempts
Press / to edit,  -  to enter number of dialling attempts, / to accept
AV Re-Dial Delay
Press / to edit,  -  to enter the re-dial delay, / to accept
Setup IP Data?
Press / to set-up IP Module, N/N to exit
Select Com Port?
Use  to select Com Port 1,2 or 3, / to continue N to exit
ComIP Address
Press / to edit,  -  to enter an IP Address, / to accept
ComIP Port
Press / to edit,  -  to enter a Port Number, / to accept
ComIP Gateway
Press / to edit,  -  to enter a Gateway Address, / to accept