INS760EN-7 36/91
SmartCom AP Passphrase is returned to default (as printed on SmartCom
label).
NOTE: The SmartCom can only be defaulted with the front cover removed.
7.0 Programming The Panel
The next step is to program the panel to communicate with the SmartCom by
setting the com port configuration and the Alarm reporting.
It should be noted that to function correctly with the Texecom Connect
app the following applies:
All Zones MUST have text. Without text the app will not know the zone exists.
All Areas MUST have text. Without text the app will not know the Areas exist.
Users of the system MUST have: (Without this the app will not
recognise the user.)
Panel User Name
Panel User code
Connect V2 App also requires cloud account user name and password.
It is advisable to only assign Areas that are appropriate to the user to avoid
display of additional areas.
A UDL password MUST be programmed
Flash upgraded panels must have a Unique ID. See Appendix B for details.
To Next Page
Loading...
Need help?
General
