INS760EN-7 5/91
Texecom Connect App for iOS or Android
SSID & Password for the Network if you intend to connect by WiFi.
A Texecom Connect SmartCom (CEL0001 Ethernet & WiFi)
A laptop or PC with Wintex installed. (When the panel firmware needs to be
upgraded, Texecom Cloud Services may be used for firmware >V5.00)
In addition if the system will be using any Ricochet® enabled devices the wireless
receiver should be V3.0.6 or later.
Peripheral products may also be used to enhance the user experience. Some of
these are traditional security devices such as wireless PIR’s with added
functionality such as Light and Temperature reading capability.
Other products designed for specific Home & Building Automation tasks such as
the Texecom Connect SmartPlug may also be added to the system. These devices
can be added at the time of installation, or if the functionality is enabled may be
added and removed as required by the Master User.
2.1 Hardware Requirements
The following hardware is compatible with the Texecom Connect App.
Premier Elite Control Panel (live-front, polymer or metal)
Premier Elite 12,12-W, 24-W, 48-W (discontinued, but may be flash upgraded,
see Appendix A)
Premier Elite 24
Premier Elite 48
Premier Elite 64-W
Premier Elite 88
Premier Elite 168
Premier Elite 640
Premier Elite 8/32XP-W (for wireless devices - not required on -W panels)
Communication Module
Texecom Connect SmartCom
CEL-0001 SmartCom (WiFi and Ethernet)
To Next Page
Loading...
Need help?
General
