Need help?Do you have a question about the Texecom SmartCom and is the answer not in the manual?
General| Connectivity | Ethernet |
|---|---|
| Power Supply | 12V DC |
| Product Type | Smart Communication Module |
| Remote Access | Yes |
| Push Notifications | Yes |
| Encryption | AES-256 |
| Compatibility | Texecom Premier Elite alarm panels |
| Mobile App Support | Yes |
| IP Protocol | IPv4 |
Details Texecom Monitor functionality for alarm signalling and compliance.
Lists compatible hardware required for the Texecom Connect App and system.
Specifies network prerequisites for Texecom Connect, including WiFi and DHCP.
Overview of the Texecom Connect system, including SmartCom and app.
Instructions for safely removing the SmartCom from its mounting tamper.
Procedure for establishing a network connection using an Ethernet cable.
Steps to connect the SmartCom module to a wireless network.
Information on configuring routers and necessary ports for SmartCom operation.
Instructions for resetting the SmartCom module to its factory default settings.
Configuration of control panel COM ports and setting a UDL password.
Steps to configure the panel's settings for Texecom Connect functionality.
Process for generating a unique app code for system access.
Explanation of how system availability and monitoring are performed.
Step-by-step guide for performing firmware upgrades on Elite panels.
Procedure for initial power-up and configuration after flashing an Elite panel.
Solutions and guidance for resolving common problems with the SmartCom setup.
To Next Page
