PIXIUM STATIC X-Ray Flat Panel Detectors - End User Manual
Document reference : 63137046 -
January 2024
Page 12
OPEN
This document may not be reproduced, modified, adapted, published, translated, in any way, in whole or in part, or disclosed to a third party without the prior written consent of THALES.
© 2017-2023 THALES All rights reserved
83270259-SER-MIS-EN-002
4. GLOSSARY
The present User Manual applies to following Static Flat Panel Detectors:
The present User Manual applies to following components
Name Definition
Pixium Patented generic name for all Thales flat panel digital detectors.
PixRad
Name of the generic Thales Application Programming Interface
suitable for all the static Pixium flat panel detectors proposed by
Thales. This API provides functionalities to the OEM system such
as control of the detectors, images aquisition, calibration of the
system, image pre-processing and service information.
Pixium EZ HD
Refers to all detectors Pixium 3543 EZ-C HD and Pixium 4343
EZ-C HD.
Pixium 3543 EZ-C HD
Refers to any 35 x 43 cm X-ray flat panel detector alone with an
a-Si plate (option CMEDB).
Pixium 4343 EZ-C HD
Refers to any 43 x 43 cm X-ray flat panel detector alone with an
a-Si plate (option CAEH).
PIXIUM PORTABLE 3543 EZ-C HD
Refers to the package including a Pixium 3543 EZ-C HD (option
CAEH) detector and PixRad API.
PIXIUM PORTABLE 4343 EZ-C HD
Refers to the package including a Pixium 4343 EZ-C HD (option
CAEH) detector and PixRad API.
Name Definition
BATTERY EZ HD
The BATTERY EZ HD is designed to power the Thales flat panel
detectors Pixium EZ HD.
CHARGER EZ HD
The CHARGER EZ HD is intended to recharge the BATTERY EZ
HD used to power the Thales flat panel detectors Pixium EZ HD.
The CHARGER EZ HD is designed to recharge up to three units
of BATTERY EZ HD.
CABLE EZ HD 1M
The CABLE EZ HD 1M is designed to provide the power to the
Thales flat panel detectors Pixium EZ HD, as well as to insure the
data transfer between the host computer and the detector.
To Next Page
Loading...