PIXIUM STATIC X-Ray Flat Panel Detectors - End User Manual
Document reference : 63137046 -
January 2024
Page 6
OPEN
This document may not be reproduced, modified, adapted, published, translated, in any way, in whole or in part, or disclosed to a third party without the prior written consent of THALES.
© 2017-2023 THALES All rights reserved
83270259-SER-MIS-EN-002
3. SYMBOLS
• Read the safety and operating instructions before operating the device.
• Retain safety and operating instructions for future reference.
• Adhere to all warnings on the device and in the operating instructions manual.
• Follow all instructions for operation and use
3.1. End User Symbols Definition
Caution
Caution is necessary when operating the device or control close to where the symbol is placed, or
that the current situation needs operator awareness or operator action in order to avoid
undesirable consequences
Dangerous voltage
General mandatory action
Risk to people not following the mandatory action specified by the supplementary sign
General prohibition
Risk to people specified by the supplementary sign
Reference
Refer to and read carefully this reference document to get further information.
Note
Read carefully this note. Important information is given.
CE marking of conformity.
Electrostatic sensitive device
To indicate packages containing electrostatic sensitive devices, or to identify a device or a
connector that has not been tested for immunity to electrostatic discharge. Procedure is required
to prevent any damage.
Protective Earth (Ground).
To Next Page
Loading...