PIXIUM STATIC X-Ray Flat Panel Detectors - End User Manual
Document reference : 63137046 -
January 2024
Page 15
OPEN
This document may not be reproduced, modified, adapted, published, translated, in any way, in whole or in part, or disclosed to a third party without the prior written consent of THALES.
© 2017-2023 THALES All rights reserved
83270259-SER-MIS-EN-002
5.7. Intended Purpose (For EU Countries Only) / Indication For Use (USA only)
5.8. Indications
5.9. Intended Patient Population
5.10.Contraindications
5.11.Limitations
5.12.Adverse effects / Undesirable side-effects
5.13.Acclimatization Time
The most important unpacking and handling instructions are attached to and visible on the outer packaging, within the
Storage and Handling instructions document. More general instructions and cautions are given in the present document.
A special care shall be taken in unpacking the Pixium in order to avoid water condensation due to an abrupt temperature
and humidity transition.
Pixium Static Detectors are a part of imaging chain of an overall radiology system and are
intended to generate high quality digital image.
Pixium Static Detectors allow Imaging of the skull, chest, shoulders, spine, abdomen, and
extremities. Applications can be performed with the patient sitting, standing, or lying in the prone
or supine position.
There is not limitation on patient target group nor patient selection criteria.
Fluoroscopy, angiography and mammography are excluded
There is no limitation.
Potential side effects are the results of multiple irradiations for the same patient due to damaged
image quality due to detector malfunctioning.
To Next Page
Loading...