Thecus N2810 Series User Manual

44
Power
Current status of the power being supplied to the
UPS
First notification (sec)
Delay between power failure and first notification
in seconds.
Subsequent notifications (sec)
Delay between subsequent notifications in
seconds.
Shutdown percentage (%)
Amount of UPS battery remaining before system
should auto-shutdown.
Apply
Press Apply to save your changes.
Hardware Control
The system buzzer can be Enabled/Disabled by clicking the check box. Check
to enable system buzzer when any error occurs or disable to mute the system.

Thecus N2810 Series Specifications

General

Brand	Thecus
Model	N2810 Series
Category	Server
Language	English