Front Panel
The Thecus N5200’s front panel has the device’s controls, indicators, and hard
disk trays:
Front Panel
Item Description
1.DOM LED • Solid orange: system is being upgraded or system startup;
data currently inaccessible
2.WAN LED
• Solid green: network link
• Blinking green: network activity
3.LAN LED
• Solid green: network link
• Blinking green: network activity
4.USB Copy LED • Solid blue: files are being copied from a USB storage device
5.Busy LED • Blinking red: Raid volume in degrade mode or demage
6.USB Port
• USB 2.0 port for compatible USB devices, such as USB disks,
USB printers, and USB wireless dongles*
Note: For supported USB wireless dongles, please contact
http://esupport.thecus.com/support
7.Power Button • Power on/off N5200
• Solid blue: Device is powered on
• Blinking blue: eSATA hard disk is connected and active
8.Reset Button
• Resets the N5200
• Press for five seconds during boot process to reset IP address
and admin password
9.HDD Trays • Five 3.5” SATA HDD trays
• Locks are provided for added security
10.LCD Display • Displays current system status and warning messages
• Displays hostname, WAN/LAN IP address, RAID status, and
current time
11.Up Button ▲
• Push to scroll up when using the LCD display
12.Down Button ▼
• Push to scroll down when using the LCD display
13.Enter Button ↵
• Push to confirm information entered into the LCD display
14.Escape Button
ESC
• Push to leave the current LCD menu
10
To Next Page
Loading...
Need help?
General