Printer Status
Item Description
Manufacturer Displays the name of the USB printer manufacturer.
Model Displays the model of the USB printer.
Status Displays the status of the USB printer.
Remove document
from Queue
Click to remove all documents from printer queue
Restart Printer service Click to restart printer service
If a corrupt print job is sent to a printer, printing may suddenly fail. If your print
jobs seem to be locked up, pressing the Remove All Documents button to clear
the print queue may resolve the issue.
For information on how to set up the Printer Server, refer to Chapter 5:
Additional Feature Setup > Printer Server.
UPS Settings
The N5200 can also support various
uninterruptible power supply units,
providing extra data security and
accessibility in the case of a power failure.
From the Status menu, choose the UPS
item and the UPS Setting screen appears.
Make any changes you wish, and press
Apply to confirm changes. See the
following table for a detailed description of
each item.
UPS Settings
Item Description
UPS Monitoring Enable or disable UPS monitoring.
Manufacturer Choose the UPS manufacturer and model number
from the dropdowns.
Battery Status Current status of the UPS battery
Power Current status of the power being supplied to the
UPS
Seconds between power failure and
first notification
Delay between power failure and first notification
in seconds.
Seconds between subsequent power
failure notifications
Delay between subsequent notifications in
seconds.
Shutdown the system when the
battery charge is less than
Amount of UPS battery remaining before system
should auto-shutdown.
Apply Press Apply to save your changes.
For a list of supported UPS units, see Appendix E: UPS Compatibility List.
26
To Next Page
Loading...
Need help?
General