Chapter 4: System Management
Overview
The N5200 provides an easily accessible Web Administration Interface. With it,
you can configure and monitor the N5200 anywhere on the network.
Web Administration Interface
Make sure your network is connected to the Internet. To access the N5200 Web
Administration Interface:
1. Type the N5200’s IP address into your browser. (Default IP address is
http://192.168.1.100)
Your computer’s network IP address must be on the same subnet as
the N5200. If the N5200 has default IP address of 192.168.1.100, your
managing PC IP address must be 192.168.1.x, where x is a number
between 1 and 254, but not 100.
NOTE
2. Login to the system using the administrator user name and password. The
factory defaults are:
User Name: admin
Password: admin
If you changed your password in the setup wizard, use the new password.
Once you are logged in as an administrator, you will see the Web
Administration Interface. From here, you can configure and monitor virtually
every aspect of the N5200 from anywhere on the network.
Menu Bar
The Menu Bar is where you will find all of the information screens and system
settings of the N5200. The various settings are placed in the following groups on
the menu bar:
Menu Bar
Item Description
Status Current system status of the N5200.
Storage Information and settings for storage devices installed into the
22
To Next Page
Loading...
Need help?
General