Restoring Factory Defaults
From the System menu, choose the Factory Default item and the Reset to
Factory Default screen appears. Press Apply to reset the N5200 to factory
default settings.
WARNING
Resetting to factory defaults will not erase the data
disks, but WILL revert all the settings to the factor
stored in the hard
y default values.
Problems with Time and Date Settings
The administrator is able to select an NTP Server to keep the N5200’s time
synchronized. However, if the N5200 can not access the Internet, you may
encounter a problem when setting the Time and Time Zone. If this happens:
1. Login to the Web Administration Interface.
2. Navigate to System > Time.
3. Under NTP Server, select No.
4. Set the Date, Time, and Time Zone.
5. Click Apply.
In addition, if the N5200 is able to access the Internet and you want to keep the
NTP Server clock.isc.org by default, please make sure the DNS Server is correctly
entered, thereby allowing the NTP Server name to correctly resolve. (See
Network > WAN > DNS Server)
74
To Next Page
Loading...
Need help?
General