Thecus N5200B, N5200BR User Manual

Check Update Click to look for updates for the selected module.
Module File Location of the module file.
Browse Click to browse the folder of your PC to locate the module files.
Install Click to install the listed module into your N5200
Modules can potentially harm your system. Only install modules from
your vendor, or publishers you can trust.
NOTE
Reset to Factory Default Settings
From the System menu, choose the
Factory Default item and the Reset to
Factory Default screen appears. Press
Apply to reset the N5200 to factory default
settings. Press Cancel to go back to the
main menu.
Resetting to factory defaults will not erase the data stored in the hard
disks, but WILL revert all the settings to the factory default values.
WARNING
Upgrading System Firmware
From the System menu, choose the
Firmware Upgrade item and the
Firmware Upgrade screen appears.
Follow the steps below to upgrade your
firmware:
1. Use the Browse button to find the
firmware file.
2. Press Apply.
3. The beeper beeps and the Busy LED
blinks until the upgrade is complete.
• Check Thecus website for the latest firmware release and release
notes.
• The beeper only
beeps if it is enabled in the System Notification
menu.
NOTE
55
Do NOT turn off the system during the firmware
upgrade process. This
will lead to a catastrophic result that may render the system inoperable.
WARNING

Thecus N5200B, N5200BR Specifications

General

Brand	Thecus
Model	N5200B, N5200BR
Category	Server
Language	English