Thermal Dynamics Econo-Pak 50 - Torch Parts

INTRODUCTION & DESCRIPTION 10 Manual 0-2450
2.02 TORCH PARTS
Torch Parts Selection
The same torch parts are used for drag cutting and standoff cutting.
See Section 5.03, Replacing Consumable Torch Parts.
Order replacement parts by catalog number and description.
Standard Shield Cup
Catalog No. 9-6003
A-01745
Shield Cup
Attachment (Copper)
Catalog No. 9-6503
Drag Cutting Tip
(0.031 inch Orifice)
Catalog No. 9-6501
Electrode
Catalog No. 9-6506
Gas Distributor
Catalog No. 9-6507