Specifications
B-4 DensityPRO+ Installation Guide Thermo Fisher Scientific
Table B–5. 1400S transmitter
Power options 24 Vdc (20–28 Vdc), 12 VA
115/230 Vac (100–240 Vac), 50/60 Hz, 12 VA
Operating temperature -40°C to +60°C (-40°F to +140°F)
Approvals NEMA 4X / IP65
ATEX
II 3 G Ex nA IIC T6 (-40°C ≤ Ta ≤ 60°C) DC version,
EPSILON 08
ATEX 2387: II 3 G Ex nA nC IIC T4 (-20°C ≤ Ta ≤ 50°C)
AC version, EPSILON 08 ATEX 2387
CSA
Class I, Div. 2, Groups A, B, C, and D; Class II, Div. 2,
Groups F and G; Class III Enclosure type 4X,
Temperature code T3C / T4
CE compliant
Low Voltage Directive compliant
EMC Directive compliant
Dimensions See drawing 208-140002.
Display Four-line backlit display; up to eight readouts displayed
simultaneously
Serial outputs RS232 full duplex
RS485 half-duplex
Current output One standard with two additional optionally available
Standard configuration: Isolated, self-powered, 800-ohm
maximum load
Alternate configuration: Isolated, loop-powered, 24 Vdc
nominal supply voltage, 800-ohm maximum load
Contact closure inputs Two per I/O board
To Next Page
Loading...
