Need help?Do you have a question about the Thermo Scientific Heracell 150i and is the answer not in the manual?
General| Type | CO2 Incubator |
|---|---|
| Temperature Range | Ambient +3°C to 55°C |
| Capacity | 150 liters |
| Temperature Uniformity | ±0.3°C at 37°C |
| CO2 Range | 0 to 20% |
| CO2 Control Accuracy | ±0.1% |
| Humidity Range | Up to 95% RH |
| Power Supply | 230V, 50/60 Hz |
Provides contact information for Thermo Fisher sales globally.
Details device name, type, serial number, and documentation allocation.
Outlines requirements and responsibilities for safe operation and maintenance.
Defines warning symbols and their meanings for hazard communication.
Describes correct use and lists relevant standards and directives.
Details critical safety precautions for handling carbon dioxide and oxygen gases.
Lists essential rules to follow for safe operation of the incubator.
Describes packaging and checks for completeness and damage upon delivery.
Lists standard components included with the HERACELL® 150i and 240i models.
Specifies environmental requirements and room ventilation for optimal operation.
Outlines clearances for installation and safe transportation procedures.
Explains safe stacking of units and conditions for intermediate storage.
Lists optional components that can be retrofitted to the standard version.
Illustrates and labels front and rear components of HERACELL® 150i and 240i.
Describes built-in safety features and factors controlling the internal environment.
Details door switch, sensor system, supply interface, and work space components.
Steps for acclimating the device and preparing the work space before initial use.
Guides on installing shelves, gas humidification, and bottle turning devices.
Provides instructions and safety notes for connecting gas supplies.
Step-by-step guide to initiating, operating, and safely interrupting the incubator.
Explains the control panel layout, functions, and navigation for device settings.
Guides on adjusting temperature, CO2, and O2 set values for optimal incubation.
Details auto-start, decontamination, and user-adjustable settings for operation.
Information on error messages, their causes, and troubleshooting steps.
Methods for cleaning, disinfecting, and decontaminating the incubator.
Schedule and procedures for regular inspections, calibrations, and part replacements.
Guides for calibrating sensors and replacing common parts like filters and fuses.
Detailed technical data for HERACELL® 150i and 240i models.
Describes RS232, USB interfaces, and PC software for data transfer.
Explains data logger structure, error messages, and event recording.
A table for documenting maintenance and service activities performed on the device.
To Next Page