Heracell 150i/240i 50115191_C_01-2018 46 Thermo Scientific
Chapter 4 Description of the device
4.10.1. Interior container
All components of the work space are made of stainless steel and have a high-gloss polished,
absolutely smooth and easy-to-clean surface. Any embossings have a large radius.
As an option, the interior container, the shelf system, and the blower wheel with its cover can be
made of copper material.
Materials of the interior container
The standard version is equipped as follows:
• Interior container made from stainless steel.
Materials with increased contamination protection are optionally available:
• Interior container made from stainless steel, with transparent iONGURAD™ silver ion coating,
• Interior container made from copper, combined with the following components also made from
copper material: Shelf system and blower wheel with protective grid (cover).
The components of the shelf system can be removed easily so that only the easily treatable,
surface-reduced interior container [1] remains in the work space for cleaning and manual
disinfection works.
Note
Oxidation of copper components:
When exposed to heat and humid air, the copper material of the interior container will oxidize. This results
in a discoloration of the copper components during the test run for checking the device functions. Do not
remove the oxide layer during routine cleaning as the antimicrobial effect of the copper material is based
on it.
To Next Page
Loading...
Need help?
General
