Thermocable ProReact EN Analogue - Page 3

Page 3 of 29 Revision 3.3 Feb 2021
ProReact EN Analogue Installation Manual
Document Ref. PACC-MAN
UL 521 (Category Code UQGS) Listing
Approval Specics
UL File No: S8976
UL Category (CCN): UQGS
Holder of Approval: Thermocable Flexible Elements Ltd Pasture Lane Clayton Bradford BD14 6LU UK
Subject of Approval: Heat-automatic Fire Detectors
Requirements: UL521 “Heat Detectors for Fire Protective Signaling Systems”
Approval Components
UL Model No Thermocable Part No Thermocable Description
A1389 ProReact EN Analogue A1389 ProReact EN Analogue Composite
Composite Control Unit accessory Control unit
for use with Heat Detection Cable
ProReact End-Of-Line Module Heat A1470 ProReact EN Analogue End-of-line Unit
Detector Accessory
ProReact EN Analogue Heat Detection F3050 ProReact EN Analogue PVC coated
Cable (1) (p/n F3050) Sensor Cable
ProReact EN Analogue Heat Detection F3051 ProReact EN Analogue Nylon Coated
Cable with nylon outer jacket (1) (p/n F3051) Sensor Cable
Response Classes
Model No. Type
Compatibility
Restrictions
Contact
Arrangement
Temp Range
(°F)
Spacing Ft
(Smooth Ceiling)
Spacing Ft
(to Wall or Partition)
A1389
ProReact EN Analogue
Composite Control Unit
accessory for use with Heat
Detection Cable
HSC None – – – –
ProReact EN Analogue Heat
Detection Cable (1) (p/n F3050)
HSC D1 NO 129 - 212 35 17.5
ProReact EN Analogue Heat
Detection Cable with nylon
outer jacket (1) (p/n F3051)
D1 - Listing limited to specic system control unit. Information on compatible control unit indicated on installation drawing of control
unit and/or detector.
(1) - The Models ProReact EN Analogue Heat Detection Cable and ProReact EN Analogue Heat Detection Cable with nylon outer jacket
must be used with an A1389 ProReact EN Analogue Composite Control Unit accessory and a ProReact End-Of-Line Module Heat
Detector Accessory.