5 Troubleshooting
E-SIT-CTC-20030306-0003 v3.0
72
No Line synchronization achieved.
DSL/WAN LED off or flashing
amber.
Make sure that ADSL service is enabled on
the telephone line the SpeedTouch™ is
connected to.
Make sure that the correct SpeedTouch™
variant is used for your DSL service.
In case of ADSL/POTS services at your
premises, ONLY use a SpeedTouch™ ADSL/
POTS variant.
In case of ADSL/ISDN services at your local
premises, ONLY use a SpeedTouch™ ADSL/
ISDN variant.
Problem Solution
To Next Page
Loading...
