THOMSON SpeedTouch 545 - Checking for New System Software Via the Speedtouch CD Browser

7 Support
E-DOC-CTC-20030814-0001 v1.0
78
7.3.1 Checking for new System Software via the
SpeedTouch™ CD Browser
Introduction If your computers runs a Microsoft Windows operating system you can use the Speed-
Touch™ CD Browser to check for new system software.
Checking for new
system software
Proceed as follows:
1 Insert the SpeedTouch™ Setup CD-ROM in your computer’s CD-ROM drive. The
SpeedTouch™ CD Browser will start automatically.
Note If the SpeedTouch™ CD Browser window does not appear automati-
cally, click Run on the Start menu and enter the following path:
D:\Menu.exe where D stands for the drive letter of your CD-ROM
drive.
2 The choose language window prompts you to select a language:
Select your language and click OK.
3 The SpeedTouch™ CD Browser menu appears:
Click Diagnostics & Maintenance.