7 Support
E-DOC-CTC-20030814-0001 v1.0
89
7.5 UPnP™ on Windows XP Systems
Adding UPnP™ If you are running Microsoft Windows XP, it is recommended to add the UPnP™
component to your system.
Proceed as follows:
1 On the Start menu, click Control Panel.
2 The Control Panel window appears. Click Add or Remove Programs.
3 The Add or Remove Programs window appears. Click Add/Remove Windows Com-
ponents.
4 The Windows Components Wizard appears:
Select Networking Services in the Components list and click Details.
5 The Networking Services window appears:
Select Universal Plug and Play and click OK.
6 Click Next to start the installation and follow the instructions in the Windows
Components Wizard.
7 At the end of the procedure the wizard prompts you that the installation was suc-
cesfull. Click Finish to quit.
For more information on UPnP™ and SpeedTouch™ UPnP™ features go to the
UPnP™ pages at the SpeedTouch™ web site:
www.speedtouch.com
To Next Page
Loading...
