10
6.6 Timeshift*
Timeshift allows you to pause live broadcasts and resume playback later. To activate this function set
the Timeshift mode in the DVR Set menu in HDD Information to Timeshift. For details, see 7.5.3.
Press 2 in viewing mode to activate Timeshift. The progress information banner appears on screen.
Live TV keeps playing for moment and will then pause. Press u to resume Timeshifted playback. Press
3 to return to live TV.
NOTE Timeshift and its playback only work properly when a fast USB storage
device such as a USB 2.0 HDD is connected to the receiver. Timeshift and
playback of HD content requires sufcient read/write speed of the used
USB storage device.
*This user manual describes the full functionality including the recording function and may not be applicable if the software for
recording via USB has not yet been installed.
6.7 EPG (Electronic Programme Guide)
The Electronic Programme Guide is a very useful function that allows you to view event schedules
and programme information and to mark events/movies for recording. To access the EPG, press the
EPG button in viewing mode. Use p/q to select a channel and tu to select an event. Press OK to
display detailed information of the selected event. Use to quit the detailed information screen. Press
RED to access further step functions. Use tu to select a step and OK to execute it. Press to quit
the step function. Press GREEN to set a timer for a selected event. Refer to section 7.3.4 for details of
the timer function.
NOTE Availability of EPG data depends on the broadcast.
6.8 Instant Recording*
Your new receiver allows you to make an instant recording of the programme you are watching.
Simply press 4 to start the recording. To enter the duration for the recording, press 4 again. Use the
0~9 buttons to enter the recording time and press OK to conrm.
At the beginning of the recording a recording sign will be shown for a short while on the upper left
corner of your TV screen. To stop the recording, press 3. Select Yes and press OK again to stop
the recording. It is possible to make 2 recordings at the same time if they are broadcasted on same
frequency.
You can access the Record Manager via the FILE button and select Record by pressing the button 1.
*This user manual describes the full functionality including the recording function and may not be applicable if the software for
recording via USB has not yet been installed.
**Please connect a USB storage device with sufcient free space before you start a recording.
7.0 MAIN MENU
The main menu gives you access to settings, multimedia functions and games. To access the main
menu, press MENU in viewing mode. The main menu consists of the following sub menus: Edit
Channel, Installation, System Setup, Tools and Media Player.
Throughout the main menu, MENU or can be used to get back to the previous screen.
7.1 Edit Channel
Use p/q to select Edit Channel and press OK or u to enter.
Use p/q to highlight the submenu of choice and press OK to select.
Press or t to get back to the main menu.
7.1.1 TV Channel List
In the Edit Channel menu select TV Channel List with p/q and press OK to enter.
Use tu to change the channel group (if you have already set up favourite groups).
Select the channel of choice with p/q. Press OK to view the selected channel in the preview box.
To Next Page
Loading...
