THOMSON THC301 - System Setup

English
13
The receiver will store all found channels in the channel list.
NOTE: Obtain technical data about your cable-operator base channel from
your operator and start a network search from there to nd all channels
belonging to the network.
7.2.3 Network ID scan
Select Network ID scan and press OK to enter the Network ID scan menu. Press p/q tu to
set Frequency, Symbol Rate, Scan QAM and Network ID. Obtain technical data about your cable
provider’s base channel and Network ID from your provider and start a Network ID scan from there
to nd all channels belonging to the network corresponding to the Network ID. Highlight Search and
press OK to start the search. Network ID (NID) and other technical data can usually be found on a
provider’s website.
7.2.4 LCN (Logical Channel Numbering)
If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by the provider,
channels will be stored in a provider dened order. Set LCN to On to activate provider dened
channel numbering or O to store channels in found order. This function only applies when a new
channel search is performed.
7.2.5 Free/All channels.
If Free is selected, only channels are stored that are “Free-to-watch”.
If All is selected, coded channels will also be stored.
Note: Only Free channels can be watched with this unit.
7.3 System Setup
This menu allows you to manage the system settings of your receiver. It consists of the following sub-
menus: Language, TV System, Local Time Setting, Timer Setting, Parental Lock, OSD Setting, Audio
Description Setting and Auto Standby.
Press p/q to highlight the menu of choice and press OK advance to the next screen. Use p/q to
move the highlight to the setting of choice. Values can be changed with tu. Press  to leave.
7.3.1 Language
This menu allows you to set up your language preferences.
Language: Use tu to select the language for the On Screen Display.
First Audio: Use tu to select Audio language.
Second Audio: Use tu to select a language that will be played when the language
selected at First Audio isn’t available.
Subtitle Display: Use tu to select the use of subtitle Normal, Hard of Hearing or O.
Subtitle Language : Use tu to select the preferred subtitle language.
2nd Subtitle Language: Use tu to select the preferred 2nd subtitle language if the 1st preference is
not available.
Teletext: Use tu to select the preferred Teletext language (when available).
*Availability of DVB/Hard of Hearing subtitles depends on the broadcast. If subtitles are not supported, they can be activated via Teletext
if available.
7.3.2 TV System
Use this menu to match your receiver to your TV set. The following settings are available:
Video Resolution: Use this option to select the video resolution of your TV screen. The options
are: By Source (automatic detection of video resolution offered to the
receiver), By Native TV (automatic detection of maximal resolution of TV
screen), and manual selections 480i, 576i up to 1080p. Please use a setting
that matches the specications of your TV. After a selection is made, you