THOMSON THC301 - Page 22

18
6: Press 6 to add all les of this directory/folder to the play list. Press 6 again to
delete all les from the play list.
7: Press 7 to open the Edit menu. This menu allows access of the following
functions: rename 4, copy 5, delete 6, create folder 7.
2: Press 2 to open the sort window. You can sort by Name/Time/Size and
Favourite.
INFO: Press INFO to access slideshow settings. You can change the slide time and
slideshow repetition.
3: Press 3 to show the les in a preview of 3x3 pictures.
: One step back or leave the folder and quit the function.
*This user manual describes the full functionality including the recording function and may not be applicable if the software for
recording via USB has not yet been installed.
7.5.2 HDD Information
This option shows relevant information about the connected USB device. In this menu you can also
format your USB storage device and setup the recording type.
Select HDD Information in the Media Player menu and press OK to enter.
Now you will see all details as Free and the used Recording Sizes and the used le system.
Press the YELLOW button Format to format the connected USB device.
Please, enter your PIN code to access this menu and press OK to start formatting.
Warning! Formatting will permanently delete ALL data stored on the connected
device. Please make a backup copy of all data you wish to keep before
entering the HDD Format menu. We cannot be held responsible for loss
of data from USB devices used with this receiver.
NOTE It is possible to use USB storage devices already formatted in NTFS.
Press  to leave this menu.
7.5.3 DVR Set and Format*
From the HDD Information menu, you can access the Format and the DVR Set menu.
Format: YELLOW It is only possible to format your USB HDD device with FAT32 FAT. However,
an already formatted USB HDD device in a PC with NTFS can also be used in
this receiver.
DVR Set BLUE This menu allows you to congure settings for Timeshift, recording and
playback.
Use p/q to move the highlight and tu to change settings.
DVR Set Select between REC&TMS, Record or Timeshift. When REC&TMS, is
selected, both Record and Timeshift is possible. Timeshift it will automatically
restart every time after changing a channel. When the 2 button on the
remote control is pressed, the picture will freeze, and it is possible to return
to the point of the last changing of the channel. When set to Timeshift only
Timeshift is possible, when set to Record, only record is possible.
Press  to leave this menu.
*This user manual describes the full functionality including the recording function and may not be applicable if the software for
recording via USB has not yet been installed.
7.5.4 Remove USB device safely
Select Remove USB device safely from the tools menu and press OK. The receiver will display a
message indicating that you can safely remove your storage device from the receiver.
NOTE After performing this function, the USB device is no longer accessible from
your receiver. To gain access to your storage device again, re-insert it or
switch the receiver to standby and on again.