P12
MAIN MENU
you. Save the timer with OK. To display the list of booked events just press the BLUE button while
being in viewing mode. Please refer to section 7.4.1 for more details.
Press RED or GREEN or P+/P- to jump 10 places in the list. A total of 32 events can be booked.
6.7 Favourite channels
Press the FAV button to access your favourite channels and to toggle between available favourite
groups. Please refer to section 7.1.1 for details on how to create favourite lists.
6.8 Instant Recording*
Your new receiver allows you to make an instant recording of the programme you are watching.
Simply press 4 and confirm with OK to start the recording. Default recording time is set to 2:00
hours. If you like to change the duration time of a recording, press 4 and select the duration with
tu. During the recording a recording sign will be shown in the channel list. To stop the recording,
press 3 and press OK again to stop the recording.
*This user manual describes the full functionality including the recording function and may not be applicable if the PVR software has not yet been
installed.
**Please connect a USB storage device with sufficient free space before you start a recording.
6.9 Timeshift*
Timeshift allows pausing live broadcasts and resume playback later. Press 2 in viewing mode
to activate Timeshift, according the set Timeshift mode in the menu. A time banner and pause
symbol will appear on screen. Live TV is now frozen. Press 2 to resume timeshifted playback. Press
5 6 for fast rewind/fast forward. Press 3 to return to live TV.
*This user manual describes the full functionality including the recording function and may not be applicable if the PVR software has not yet been
installed.
7.0 MAIN MENU
The Main Menu consists of the following items: Installation, Channel, Multimedia, System, Others
and Network.
7.1 Installation
This menu consists of the following items: Satellite Setting, Automatic SAT Scan, Manual Scan,
Satellite Find, Information. Press the MENU button and tu pq to navigate through the menu.
7.1.1 Satellite Setting
Press the pq buttons to highlight the satellite your dish is aimed at. Its antenna settings will
be shown at the right side. You can enter the right side with the tu buttons and return to the
satellite list with EXIT. From the Satellite Setting menu, you can start a scan by pressing the GREEN
button after you have made the appropriate settings or edit transponders by pressing the RED
button.
To Next Page
Loading...
