MAIN MENU
P19
English
Banner Display Time: Set the time-out for the info banner. Possible settings are: Always, 1~30
seconds in several steps.
7.2.5.3 Clock setting
Press MENU and select Clock setting. The menu provides options to adjust the time and date
settings.
Press pq to select an option and tu to adjust the setting. Press EXIT to exit the menu.
GMT Usage: Select On for automatic time and date updates from live signal or Off for
entering them manually.
Time Zone: Select the Offset from GMT standard time.
Set Date: Enter the date using tu and the numeric buttons when GMT Usage is set
to Off.
Set Time: Enter the time using tu and the numeric buttons when GMT Usage is set
to Off.
Sleep Time: Enter the duration the unit should continue running before switching itself
off. Select 15 min up to 120 min or Off.
Summer Time: Select On or Off depending on the year’s period.
7.2.5.4 TV setup
Press MENU and select TV Setting. The menu provides options to adjust the interaction between
TV (monitor) and this receiver. Press pq to select an option and tu to adjust the setting. Press
EXIT to exit the menu.
TV Format
You can set the display format to available settings:
For 4:3 TVs:
4:3LB: 4:3 LetterBox: The full 16:9 picture will be displayed on your 4:3 TV set with
black bars above and below the picture.
4:3PS: 4:3 Pan&Scan: The centre of the 16:9 picture will be displayed full-screen
on your 4:3 TV
16:9LB Combination of Letter-box and Pan&Scan. For 16:9 TVs:
16:9FIT: Select when using a 16:9 TV set. Whole picture will be shown.
TV mode
Only PAL possible.
Video output
This setting is relevant when the receiver is connected to the TV set via Scart. Select Scart RGB for
the best picture quality or Scart CVBS if your TV doesn’t support RGB. If connected by HDMI, leave
it on HDMI.
TV Resolution
If the video does not appear correctly, change the setting. These settings match the most
common settings for HDMI.
576i: For analogue TVs (on Scart connection).
To Next Page
Loading...
