P22
MAIN MENU
them back to the receiver later. This feature is especially helpful after unintentional changes or
factory reset. In such cases just skip the Installation by pressing EXIT in Installation and select the
database management menu in System, Update&backup.
7.2.5.8 Factory setting
Reset your receiver to the default factory settings. Sometimes useful if the unit suddenly behaves
in an unexpected manner, e.g. after a power failure.
Select System then factory setting in the main menu and press OK to select. Enter your PIN code
or the DEFAULT PIN: 0000 and press OK to confirm. This option will delete all your channels and
settings. The receiver will reboot and start with the initial Installation menu.
WARNING: A factory reset will permanently delete all your personal settings, timers and
stored channels. Please consider this before you perform a factory reset.
Others
Here you will find some simple convenient items to use.
Calendar Find out quickly what day is a certain date.
Calculator Have quick access to a digital calculator.
Game Select from three games, follow the instructions on screen.
Network
The unit is equipped with a network connection, which can provide weather forecasts and RSS
news reports via an Internet portal. Connect a CAT5E cable (or higher quality) to the Ethernet RJ45
connector of the unit, and the other end to an existing switch/router/modem which is connected
to the internet. The default setting is Auto (DHCP) for automatically obtaining IPs and DNS. Select
Manual in Network Settings to enter own settings if required. Refer to the manual of your router or
modem to setup properly. The Ping test can be selected to check your connecting, once done.
Weather You can setup several cities to monitor 5-day weather forecast on regular
basis. Up to 4 cities can be monitored around the globe. Select pre-defined
cities or enter your own preference with the RED search button and use the
key-pad to enter. Select the symbol to save. Press YELLOW to save all cities.
Delete a city with BLUE, then press YELLOW to save. After setting up for the
first time, exit from the Weather app and enter again to see the forecasts. Use
tu to scroll through the cities. To edit cities again, press YELLOW.
RSS Feed Enter your own preferred RSS feeds with the YELLOW button or use the
default settings with the RED button. Start editing by using the tu
buttons and the appearing key-pad. Be sure to save with the symbol.
Press OK to connect to a selected feed. Use the pqtu buttons to scroll
through the content.
NOTE: Applications available in our product(s) may change from time to time
and are not guaranteed to work at all times. They are subject to technical,
commercial and/or license related changes.
To Next Page
Loading...
