P2
17 Nov 2014 18:52
TABLE OF CONTENT
1.0 INTRODUCTION 3
1.1 Safety Instructions 3
1.2 Storage 3
1.3 Equipment Set-up 4
1.4 Accessories 4
1.5 Usage of external USB devices* 4
2.0 YOUR RECEIVER 5
2.1 Default PIN: 0000 5
2.2 Front panel 5
2.3 Rear panel 5
2.4 Remote Control 5
2.5 Installing the batteries 7
2.6 Using the remote control 7
3.0 CONNECTIONS 7
3.1 Basic connection using an HDMI cable 7
3.2 Basic connection using a Scart cable 7
3.3 Connecting multiple fixed LNBs using a
DiSEqC 1.0/1.1 switch 8
3.4 Connecting to Ethernet 8
4.0 FIRST TIME INSTALLATION 8
4.1 Installation 9
5.0 QUICK GUIDE FOR USING YOUR RECEIVER
9
6.0 OPERATION 10
6.1 Changing channels 10
6.2 Info banner 11
6.3 Selection of audio language 11
6.4 Teletext 11
6.5 Subtitles 11
6.6 EPG (Electronic Programme Guide) 11
6.7 Favourite channels 12
6.8 Instant Recording* 12
6.9 Timeshift* 12
7.0 MAIN MENU 12
7.1 Installation 12
7.2 Channel 16
7.3 Multimedia 23
8.0 TROUBLESHOOTING 26
9.0 SPECIFICATIONS 28
*This user manual describes the full functionality including the recording function and may not be applicable if the PVR software has not yet been
installed.
THOMSON declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EC and
73/23/EC, RoHS 2002/95/EC
Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may
change. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks
of Dolby Laboratories. All other product names are trademarks or registered trademarks of their respective owners.
© THOMSON 2014. All rights reserved.
To Next Page
Loading...
