THOMSON THS844 - Using the CH+;- or buttons; Using the button; Volume Control; Programme Information (Info banner)

10
A-Z to search for the channel from the list in alphabetical order. In Group
parameter dene rst letter of channel name. At right side on screen you will
see only channels, which name starting from selected letter.
FAV to search for the channel within your favourite lists.
SAT to search for the channel by satellites, which channels were stored to
receiver.
Note: The bottom row on the screen provides technical information of the
selected channel.
6.1.3 Using the CH+/- or pq buttons
CH+ or p will switch to a higher channel.
CH- or q will switch a lower channel.
6.1.4 Using the 9 button
Use the 9 button to return to the last viewed channel.
6.2 Volume Control
The volume control allows you to adjust the audio volume. Press VOL+/- or t u button to adjust the audio
volume. Press the ! button to temporarily mute audio. Press it again to come back to normal volume.
Note: The ! function remains set while you switch channels.
6.3 Programme Information (Info banner)
Programme information is always displayed for a certain period of time whenever you switch
channels.
You can also view the programme information by pressing the INFO button while watching a
programme.
Press  to hide the info banner.
Info banner:
- Indicates channel number and name
- Indicates current time and date
- Informs about current programme name
- Indicates name and schedule of the next programme
- Displays satellite signal strength and quality bars
- Provides programme encryption information
- Provides video and audio parameters for broadcasted programme
- Provides subtitle and teletext information (displayed if available with the programme broadcast).
Use the pq buttons of the remote control to switch channels.
Use the t u buttons of the remote control to scroll information through previous/next channel
information for current time.
6.3.1 Extended information panel
To access the extended information, press INFO button:
- once during presence of the information banner on screen
- twice in viewing mode.
The details of the current programme information (name and description of the current programme)
will be provided in an additional window*. If the programme description does not t in the display
area, you can use pq to scroll through this information. To view information about the next
programme, use t u or press INFO. Press  to close extended information panel.
Note: You can change the on-screen duration of the info banner in the Output
Settings menu. Please refer to section 7.2.2 for more details.
* Information will be displayed if available. Availability depends on the broadcaster.