THOMSON THS844 - Electronic Program Guide (EPG); Settings; Language

English
13
2. You will be switched to the full Channel list (central column). Use the pq buttons to select a
channel and OK to mark it for deletion. This will add it to your Selected list (right column).
3. If you do not want to delete any selected channels, you can remove them from the Selected
list. Press the u button to switch to the list. With pq select the required channel and press
OK to remove it.
4. Press 9 or  to conrm or cancel your changes and exit the deleting mode.
Locking TV programmes
You can lock selected programmes for restricted view.
1. With pq select Lock from the Operation list (left column) and press OK.
2. You will be switched to the full Channel list (central column). Use pq to select a channel
and OK to mark it for locking. This will add it to the Selected list (right column).
3. If you do not want to lock any selected channels, you can remove them from the Selected list.
Press the u button to switch to the list. With pq select the required channel and press OK
to remove it.
4. Press 9 or  to conrm or cancel your changes and exit from the locking mode.
To view the locked programme, you need to enter a PIN code. We recommend you to change the
default PIN code and enter a new PIN code. Refer to chapter 7.2.3 for more details.
Moving TV programmes
1. With pq select Move from the Operation list (left column) and press OK.
2. You will be switched to the full Channel list (central column). Use pq to select a channel.
3. Press the RED button to specify a new channel number or OK to add a channel in the
Selected list (right column) for moving it later.
4. Repeat the previous step to add more channels to a new position within the Selected list.
5. Press the u button to switch to the Selected list.
6. With pq select the required channel and press the RED button to dene a new channel
number in the channel list (enter the new channel number with 0~9 keys).
7. Repeat the previous step to specify numbers for each selected channel you want to move or
press OK to remove it from the list (channel will not change its number).
8. Press 9 or  to conrm or cancel any changes and exit the locking mode.
7.1.2 Radio Manager
In the Radio Manager menu you can do the same operations which were done in chapter 7.1.1 TV
Manager.
7.1.3 Electronic Program Guide (EPG)
Please refer to section 6.8 above.
7.2 Settings
Use t u to access the menu Settings, which includes the following submenus: Language, Output
Settings, PIN code management, Time settings, Timer and Software Update (OTA). Use pq to
select the submenu and press OK. Use t u to change the value or OK to select it from the list. Use
the 9 button to return to the previous step. Press  to exit the menu and to go back to the viewing
mode.
7.2.1 Language
OSD Language: Select the preferred language for the on-screen display.
1st Audio Language: Select the preferred audio language for watching TV channels. This setting
allows you to dene the default audio track or language.
Digital TV allows the operator to transmit more than one audio track or
language. If a channel has multiple audio tracks or languages, the receiver
will select the suitable audio track automatically according to your selection.
In the viewing mode you can change this selection to a more suitable
variation, as described in chapter 6.4.