TSC 80e TRANSFER SWITCH CONTROLLER
PM091 Rev 1 09/02/27 Thomson Technology
22
3.6. TSC 80e LCD DISPLAY OPERATION
The TSC 80e incorporates a Liquid Crystal Display (LCD) that is visible on the front faceplate.
The LCD has pre-programmed displayed messages which are automatically displayed in an
auto-Scrolling mode or they may be selected manually by pressing the UP or DOWN
pushbuttons in succession until the desired menu is displayed. The display menu types and
order in which they are programmed are as follows:
3.6.1. LCD DISPLAY SCREENS
The following seventeen (17) Display Screens are provided:
SOFTWARE VERSION
SYSTEM TIME CLOCK
GENERATOR VOLTAGE/FREQUENCY
UTILITY VOLTAGE/FREQUENCY
SYSTEM CONFIGURATION
GENERATOR UNDER VOLTAGE SETPOINT
GENERATOR UNDER FREQ. SETPOINT
GEN SET START DELAY COUNTER/SETPOINT
GEN SET WARMUP DELAY COUNTER/SETPOINT
GEN SET COOLDOWN DELAY COUNTER/SETPOINT
NEUTRAL DELAY COUNTER/SETPOINT
UTILITY UNDER VOLTAGE SETTING
UTILITY RETURN COUNTER/SETPOINT
AUTO EXERCISE MODE STATUS
GENERATOR MODE STATUS
UTILITY FAULT STATUS
GENERATOR FAULT STATUS
To Next Page
Loading...
Need help?
General
