THOMSON TSC 80E - V2.2 - TSC 80 e Specifications

TSC 80e TRANSFER SWITCH CONTROLLER
PM091 Rev 1 09/02/27 Thomson Technology
54
6. TSC 80e SPECIFICATIONS
• POWER SUPPLY:
- 120VAC nominal (+10% -30%)
- 50/60Hz
- 6VA nominal (no external load connected)
• VOLTAGE SENSING:
- Direct 120-600VAC nominal, single or 3 phase
- 50/60Hz
- +/- 1.0% accuracy of setting @ 25°C
• OPERATING TEMPERATURE:
- 15°C to +50°C
• OUTPUT CONTACTS (Form C, 10A,120/250VAC resistive)
- Engine Start
- Programmable Output Contact #1
- Programmable Output Contact #2
- Programmable Output Contact #3
- Programmable Output Contact #4
- Programmable Output Contact #5
• OUTPUT SIGNALS (120VAC resistive load)
- Transfer to utility 10A
- Transfer to generator 10A