Need help?Do you have a question about the THORLABS PCS-6000 Series and is the answer not in the manual?
General| Brand | THORLABS |
|---|---|
| Model | PCS-6000 Series |
| Category | Controller |
| Language | English |
Explains safety symbols used in the manual and on the product for user guidance and hazard identification.
Introduces the PCS-6000 series micromanipulator, its capabilities, and applications in patch clamp recording.
Details the primary components of the PCS-6000 system, including the micromanipulator assembly and control units.
Explains how coarse and fine motion are achieved using stepping motors and piezo-flexure assemblies.
Describes different PCS-6000 models and their axes of motion, including right/left handed options.
Describes the front panel of the control unit, including indicators and switches for operation.
Explains the motor control board, receptacles, indicator lights, and motor stall conditions.
Details the piezo control board, its receptacles, and voltage application for fine positioning.
Identifies ports and connectors on the rear panel of the control unit for various connections.
Describes the ACU's function in piezo positioning and its connection and resolution.
Explains the function and controls of the joystick for motor positioning and speed selection.
Instructions for safely unpacking the unit and removing shipping clips to prevent damage.
Steps for securely mounting the manipulator to a surface using the rotation plate adapter.
Guidance on properly connecting cables to the control unit and securing them to prevent disruption.
Details on attaching the headstage and pipette adapter plate to the manipulator.
Procedure for powering on the unit and verifying motor function for each axis.
Instructions for attaching the headstage and checking piezo fine motion control.
Steps for setting the angle of the approach axis for optimal positioning.
Procedure for setting the adjustable stop mechanisms on the rotary pivot stages.
Provides practical advice for joystick and piezo control, single stepping, and drift issues.
Outlines routine maintenance tasks and their recommended intervals for the PCS-6000 system.
Step-by-step guide for lubricating motor shafts to ensure smooth operation.
Instructions for safely replacing the main power line fuse in the control unit.
Describes how to adjust the friction of the control knobs on the Axis Control Unit.
Details on using a spanner wrench to adjust friction and lateral stability of manual adjustment knobs.
Provides solutions for common problems like excess motion, no fine motion, and no coarse motion.
Lists operating conditions, transport/storage conditions, and product safety standards compliance.
Explains Thorlabs' WEEE compliance and user responsibility for waste treatment.
Discusses the environmental impact of WEEE and the goals of RoHS and WEEE directives.
Details the two-year warranty period, repair/replacement policy, and warranty exclusions.
Provides contact details for technical support and sales inquiries worldwide.
To Next Page
