Rev B, January 10, 2020 Page 35
PCS-6000 Series Specifications
Performance
Travel
Piezo 150 or 300
µm
Motorized 25
mm
nominal
Manual 25
mm
nominal
Resolution
60
nm
(150 µm) OR
120
nm
(300 µm)
1.6
µm
minimum step
size
32 threads per
inch lead screw
Speed
Directly proportional to
rate knob turns
Variable between 1/2
µm
and 2
mm
/sec
-
Stability
<1 µm per hour
Dimensions & Weight
Manipulator
Controls
Dimensions 7" x 8.5" x 7.5" 12" x 10" x 8.5"
Weight 5 lbs 6 lbs
Power Requirements
Voltage and Frequency 100 to 240 V 50/60 Hz
Fuse
T4A, 250 V, [5 x 20
mm
]
Electromagnetic Compatibility
EN 61326-1:2001/A1/A2
Electromagnetic
Compatibility
Immunity Testing-
Measurement,
Control and
Laboratory
Equipment
CE Marking:
Council Directive 72/23/EEC
Council Directive 89/336/EEC
Low Voltage Directive
EMC Directive
FCC Class A Digital Device or Peripheral- Information to User
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference and (2) this device must accept any
interference received including interference that may cause undesired operation
PCS-6000 Series Motorized Patch-Clamp Micromanipulator Chapter 8: Specifications
To Next Page
Loading...
