Thrustmaster TSS HANDBRAKE User Manual

11
4. Installing the detachable lever
1. Slide the detachable lever between the attachment
arms. Adjust the lever at the desired height. The
lever’s total height (knob included) can be adjusted
between 21 cm and 30 cm.
2. Insert the two BTR M8 screws into the holes in the
lever and fit the two M8 nuts.
3. Tighten the screws and nuts using the wrench key
and the 6 mm Allen wrench.

Thrustmaster TSS HANDBRAKE Specifications

General

Adjustable	Yes
Connectivity	USB
Force Feedback	No
Compatibility	PC
Type	Handbrake
Material	Metal
Mounting	Screw threads for hard mounting