Need help?Do you have a question about the Tiger 3D Printers Tiger3D XHD and is the answer not in the manual?
General| Build Volume | 300 x 300 x 400 mm |
|---|---|
| Print Speed | up to 150 mm/s |
| Filament Diameter | 1.75 mm |
| Heated Bed | Yes |
| Bed Temperature | up to 110°C |
| Nozzle Temperature | up to 260°C |
| Materials | PLA, ABS, PETG, TPU |
| Nozzle Diameter | 0.4 mm |
| Connectivity | USB, SD Card |
| Frame Material | Aluminum |
To Next Page