1.2 Safety Precautions
Please read through the following Safety Precautions before you begin using your printer.
(1) Use only the power adapter and accessories provided by the manufacturer for this printer.
(2) Before plugging the power adapter into an electrical outlet, verify the local power rating conforms
withthespeciedvoltageandfrequency.
(3) This printer needs a grounded, 1-phase electrical power source.
(4) Make sure power and communication cables are well managed to prevent injury.
(5) Only use resins supplied by the Tiger3D manufacturer. Use of other unauthorized resins may
cause printing failure.
(6) Do not expose the resin tank to a direct light source; the resin will solidify under UV light.
(7) Chemical substances like resin may cause skin irritation. Please read the guidelines in the Material Safety
Data Sheet (MSDS) supplied by the manufacturer. It is recommended that the user wear protective gloves
when handling resin.
(8) Before lifting and moving the printer, be sure to dispose of the remaining resin in the reaction tank.
Cleanthetankinadvancetopreventresinoverow.
(9) Keep printer doors closed during printing or curing to prevent UV leakage.
(10) UV light may cause injury to the eyes. Do not stare directly into the printer when it is in operation.
Wearing UV protective glasses is reccomended during printer operation.
(11) Place the printer on a level surface and keep it in an upright position at all times.
(12) Do not store the printer in extremely hot or cold temperatures.
(13) Do not attempt to disassemble or repair the printer yourself. Doing so may cause device malfunction or injury.
2
Explore Endless Creativity with Tiger 3D
To Next Page
Loading...