TMC EPIC ET4000 - Setting Up Your System; Setting Up Your System At A Glance

Setting Up Your System
Setting Up Your System At A Glance
The following must be done at each station:
Program
Station Number
Assignment
Automatic Line Selection
Set Distinctive Ringing
Toll Restriction
Set up and Private,
Auxiliary, and
Unconnected Lines
Set Ringers
On/Delayed/Off
Select Intercom Ring,
Voice or Handsfree
Factory Setting
Not assigned
Line 1
None Set
No Restrictions
None Set
All Ringers On
Handsfree
Page
8
12
13
14-17
19
22
54
10
Note: You must program a feature only if you wish to change its setting from the
Factory Setting.
ET4000 UG for PDF v8 062502.qxd 6/25/02 12:51 PM Page 20