72
To erase all the feature settings stored at a par-
ticular station and return that telephone to its
original factory settings, follow these steps.
Note that when you erase all feature settings at
a particular station, you do not erase the memo-
ry dial or the shared directory dial numbers that
may be stored in this station. If you ever wish to
erase stored memory numbers, follow the
instructions on page 49.
Erasing All Feature Settings
To erase all feature settings at
a particular telephone:
1
Press PROGRAM.
- The display will read “Program...”
2 Press the soft key under NEXT
repeatedly, until “Advanced Setting”
appears in the display, and then
press ENTER.
3 Press the soft key under NEXT until
“Erase Settings” appears in the dis-
play, and then press ENTER.
- The display will read “Feature
Settings.”
4 Press the soft key under ERASE.
- The display will read “Erasing
Done!”
Additional Information
To Next Page
Loading...
General